Planet GS-5220-8UP2T2X Layer 3 8-Port 10/100/1000T 802.3bt PoE + 2-Port 10/100/1000T + 2-Port 10G SFP+ Managed Switch

Features

Physical Port

• 8-Port 10/100/1000BASE-T with 72W PoE injector
• 2-port 1/10G BASE-X SFP+
• RS-232 RJ45 console interface for switch basic management and setup

Power over Ethernet

• Up to 8 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE Power up to 72 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100 meters
• PoE Management

– PoE Port Status monitoring

– Over Temperature Protection

– PoE usage threshold

– Temperature threshold

– Per port PoE function enable/disable

– PoE Port Power feeding priority

– Per PoE port power limit

– PD classification detection

– Sequence port PoE

Layer 2 Features

• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Storm Control support

– Broadcast/Multicast/Unknown unicast

• Supports VLAN

– IEEE 802.1Q tagged VLAN

– Up to 255 VLANs groups, out of 4094 VLAN IDs

– Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)

– Private VLAN Edge (PVE)

– Protocol-based VLAN

– MAC-based VLAN

– Voice VLAN

– GVRP

• Supports Spanning Tree Protocol

– STP, IEEE 802.1D Spanning Tree Protocol

– RSTP, IEEE 802.1w Rapid Spanning Tree Protocol

– MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN

– BPDU Guard

• Supports Link Aggregation

– 802.3ad Link Aggregation Control Protocol (LACP)

– Cisco ether-channel (static trunk)

– Maximum 6 trunk groups, up to 4 ports per trunk group

– Up to 44Gbps bandwidth (full duplex mode)

• Provides port mirror (many-to-1)
• Port mirroring to monitor the incoming or outgoing traffic on a particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)

Layer 3 IP Routing Features

• IP dynamic routing protocol supports OSPFv2
• Routing interface provides per VLAN routing mode
• Supports maximum 128 static routes and route summarization

Quality of Service

• Ingress Shaper and Egress Rate Limit per port bandwidth control
• 8 priority queues on all switch ports
• Traffic classification

– IEEE 802.1p CoS

– TOS/DSCP/IP Precedence of IPv4/IPv6 packets

– IP TCP/UDP port number

– Typical network application

• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Traffic-policing policies on the switch port
• DSCP remarking

Multicast

• Supports IGMP Snooping v1, v2 and v3
• Supports MLD Snooping v1 and v2
• Querier mode support
• IGMP Snooping port filtering
• MLD Snooping port filtering
• Multicast VLAN Registration (MVR) support

Security

• Authentication

– IEEE 802.1x Port-based/MAC-based network access authentication

– Built-in RADIUS client to co-operate with the RADIUS servers

– TACACS+ login users access authentication

– RADIUS/TACACS+ users access authentication

• Access Control List

– IP-based Access Control List (ACL)

– MAC-based Access Control List

• Source MAC/IP address binding
• DHCP Snooping to filter un-trusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• Auto DoS rule to defend DoS attack
• IP address access management to prevent unauthorized intruder

Management

• IPv4 and IPv6 dual stack management
• Switch Management Interfaces

– Console/Telnet Command Line Interface

– Web switch management

– SNMP v1, v2c, and v3 switch management

– SSH/SSL secure access

• IPv6 IP Address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance

– Firmware upload/download via HTTP/TFTP

– Reset button for system reboot or reset to factory default

– Dual Images

• DHCP Relay
• DHCP Option82
• User Privilege levels control
• NTP (Network Time Protocol)
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• Network Diagnostic

– ICMPv6/ICMPv4 Remote Ping

– Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
• SMTP/Syslog remote alarm
• Four RMON groups (history, statistics, alarms and events)
• SNMP trap for interface Linkup and Link down notification
• System Log
• PLANET Smart Discovery Utility for deployment management

Overview

PLANET GS-5220-8UP2T2X Layer 3 Managed Gigabit Switch supports both IPv4 and IPv6 protocols and Layer 3 OSPFv2 dynamic routing and static routing, and provides 8 10/100/1000BASE-T ports featuring 75-watt 802.3bt PoE++, 2 additional Gigabit copper ports and another 2 extra 1/10 Gigabit BASE-X SFP+ fiber slots. Each of the eight Gigabit ports provides 75 watts of power, with a total power budget of up to 240 watts for the different types of PoE applications being employed. It provides a quick, safe and cost-effective Power over Ethernet network solution to IP security surveillance for small businesses and enterprises.