Planet PoE-171S Ultra PoE Gigabit Splitter (12V/19V/24V)

Planet PoE-171S Features

• Ethernet Connector: Input Port: 1 x RJ-45 STP, PoE (Data + Power) In; Output Port: 1 x RJ-45 STP, Data Out; DC Socket: DC Out; DIP-Switch: 12V DC/19V DC/24V DC output voltage
• Data Rate: 10/100/1000Mbps
• DIP Switch: DC 12V/19V/24V by DIP switch control
• Number of Device can be powered: 1
• Ethernet Cable: Ultra PoE (60W): 10/100/1000Base-T: 4-Pair UTP Cat. 5e, 6 up to 100m (328ft); 802.3af / at PoE (15W / 30W): 10/100/1000Base-T: 2-Pair UTP Cat. 3, 5, 5e, 6 up to 100m (328ft)
• LED indicator: System: Power x 1 (Green)
• Dimension (W x D x H): 95 x 70 x 26 mm
• Operating Temperature: -10 ~ 70 Degree C; 5~95% Humidity
• PoE Standard: IEEE 802.3at Power over Ethernet Plus
• Emission: FCC Part 15 Class A, CE mark

Planet PoE-171S Overview

Quick and Easy Gigabit High Power PoE Network Deployment
PLANET POE-171S Gigabit ultra Power over Ethernet splitter delivers the Ethernet digital data with DC 56V power over the twisted pair cables as an IEEE 802.3at/af Gigabit high Power over Ethernet splitter, and it separates the digital data and the power into three optional outputs (12V / 19V /24V DC) and distance up to 100 meters. If the POE-171S co-works with PLANET POE-171 (60-watt IEEE 802.3at PoE injector), it can offer more PoE applications, such as:
■ PoE PTZ Speed Dome
　■ Other Network devices that need higher PoE power to work normally
　■ Thin-client
　■ AIO(All-in-One) touch PC
　■ Remote digital signage display
The POE-171S frees the device deployment from restrictions due to power outlet locations, which eliminates the costs for additional AC wiring and reduces the installation time.

50 watts of Power over 4-Pair UTP
The POE-171S and POE-171 ultra PoE solution use cabling standard as IEEE 802.3at/af PoE. Instead of delivering power over 2-pair twisted UTP – be it End-span (Pin 1,2,3 and 6) or Mid-span (Pin 4,5,7 and 8), it provides the capability to source up to 50 watts of power by using all the four pairs of standard Cat5e/6 Ethernet cabling. In the new 4-pair system, two PSE controllers will be used to power both the data pairs and the spare pairs.

Cost-effective and Easy Cabling Installation
In the IEEE 802.3at Gigabit high Power over Ethernet devices installed, the system administrator only has to connect one single RJ-45 Ethernet cable to carry both power and data from an IEEE 802.3at/af PoE injector to POE-171S, and then the POE-171S splits data and DC power to any of IP networking devices. Besides, to connect through IEEE 802.3at Power over Ethernet injector and POE-171S, you can also have the benefits of cost saving, easy networking planning and higher reliability. Upon the completion of the installation of IEEE 802.3at compliant devices, the POE-171S, when functioning with the POE-171, can make the connection while migrating or splitting the power and the Ethernet digital packets, such as PTZ (Pan, Tilt & Zoom) network cameras, PTZ Speed Dome, color touch-screen Voice over IP (VoIP) telephones, multi-channel wireless LAN access points and other Network devices that need 50-watt high power to work normally.

Ultra PoE Splitter and Injector Installation
For a place which is hard to find the power inlet, the POE-171S and PLANET Ultra PoE Injector – POE-171 or POE-173, operate as a pair to provide the easiest way to power your Ethernet devices which need high power input. The POE-171S separates digital data and power into three optional outputs (12V/19V/24V DC) to non-PoE devices such as laptops, PTZ (Pan, Tilt & Zoom) network cameras, PTZ Speed Dome, color touch-screen Voice over IP (VoIP) telephones, multi-channel wireless LAN access points and other network devices at distance up to 100 meters.